Home Renovation Projects - Gypsum Boards

Many people do not have the luxury of designing a brand new home that will suit their needs and tastes. Most likely you will need to make home renovation projects in order for you to enjoy a safe and relaxing home that has pleasing colors and favored furnishings.

The most basic part of home renovation projects would have to be repairs. That is, repairing existing parts of the home which you prefer to preserve instead of replace. Home renovation projects on parts of the home should not only make them look beautiful, but also to suit the different activities that take place there. Not everything is about simply being creative, because practicality is what saves you the time, effort, and money to truly enjoy a wonderful home.

Here are some small home renovation projects regarding common gypsum boards (plasterboard) that you can do yourself at home, whether for improvements or repairs:

Patching a small Hole in Gypsum Board

1) Cut out a gypsum board patch that is a bit longer and narrower compared to the hole. Tie a length of string to a nail and drive it through the center of the patch.

2) Apply some plaster or spackle onto the edges of the patch and insert it into the hole, starting on one end. Make sure to hold onto the string.

3) Pull the string in order to hold the patch against the board's rear face and fill the indentations with filler or plaster. Then you cut off the string.

4) Apply a thin coat of plaster on the patch and brush water on it. Then, smooth it down with a steel float.

Patching a large Hole in Gypsum Board

1) A much damaged gypsum board surface needs to be cut through with a sharp knife in order go back to the closest wall studs or ceiling joists.

2) Cut across the stud or joist centers and make two straight up cuts down the center of the stud or joist in order to release the damaged panel and get rid of it.

3) Cut two strips of wood to fit between the studs or joists, then secure them with screw or nail to support the edges of the main board and the patch.

4) Cut a gypsum board patch to match the piece that was removed, and nail it into position. Plug and fasten the joints, then skim plaster over the repair, then polish with a steel float.

Make Fixings in Gypsum Board

1) If the fixing must be sandwiched between joists or studs rather than into them, drill a clearance hole for the fixing device through the gypsum board.

2) Thrust a cavity anchor into the hole so it can get bigger against the back of the board, and drive in the screw. Using toggles, thread the screw through the object first.

Make Fixings into Studs

1) Use an electronic stud finder to find the stud or ceiling joist locations. It finds the nails which secure the gypsum board.

2) Once marked, drill clearance holes in the object to be fixed at corresponding centers. Check for precision.

3) Drill pilot holes through the board surface and into the stud or joist. Ensure that the drill bit is at correct angles to the surface of the wall.

4) Insert screws in all the clearance holes, and put up the object to be fixed, arrange it with the pre-drilled pilot holes and drive the screws in.

Many home renovation projects do involve gypsum board, because it is a very versatile material for lining walls and ceilings. For All Your Home Renovation & Maintenance Needs, Pls Call 012-2988560 (Selangor).

How To Make Dry Wall Construction With Gypsum Boards

Dry wall construction is a system of erecting materials without using the conventional method of wet works like mortar and bricks to form partitions diving different rooms or spaces. This kind of works involve assembling gypsum boards onto aluminum frames or structures to make the wall. This are light weight and easy to erect on floors. They are used to set up offices, divide lounges and dinning rooms in hotel and also for a domestic house internal walls.

The system of dry wall construction with gypsum boards involves first marking out the area to be partitioned. Have the aluminum structure prefabricated and its only a matter of erecting on site. Screw the ends of the structure to the abutting external walls. Drill and screw the bottom framework into the floor slab and repeat the same for the top frame onto the ceiling.Assemble the transoms and mullions to make it firm. Mark out the door and fix the frame.

For the dry wall to be complete use gypsum board screw it using the screws provided a few millimeters into the board so as to ensure a smooth finish once painted. Screw all the boards on both side of the aluminum frame work to get a wall of the intended thickness.Once the boards are fixed, pick the joint strip provided and paste it with gypsum adhesive to cover the joint between the boards and smoothen the ends such that it appears as one big board.

To paint the dry wall of gypsum boards, start with under coat and then apply filla and rubbed down. Fix the door on the frame, after which do two to three coats of paint on the boards to give a good finish. Paint the door with gloss paint or varnish if its timbre. After the decorative works are finished the floor is now divided into different rooms. When erecting this walls take proper measurements of the heights and lengths to get the correct fitting wall.

Looking for a Professional Renovation Company in Selangor? Call 012-2988560.

Gypsum Board - The Unique Building Material

Gypsum board which is also known as drywall is a unique building material. It is made of mineral gypsum and then turned into plaster by mixing it with fibreglass or paper. It is then laid between two sheets of paper. This board is then heated in a flame and then dried to form a strong board. A drywall can be cut using drywall cutters or saws. The drywalls can be cut into any desired size for building purposes.

Common Benefits of Using Gypsum Board

In the early days, the gypsum board was used for constructing walls in majority of the houses. There are many benefits of using these drywall boards. Unlike the plaster walls, the drywalls seldom require professional application and can be laid easily and quickly.

Comparatively inexpensive: Compared to the other building materials, the gypsum board is inexpensive and easy to manufacture. Therefore it is widely used in huge buildings and homes to reduce construction costs.

Light in weight: The drywall boards are relatively light in weight but still rigid. The surface is quiet smooth and continuous which makes it very easy to paint. The walls of the buildings remain beautiful and smooth when drywalls are installed.

Available in different sizes: The gypsum board can be cut into different sizes and shapes to suit the building purposes of homes and apartments. These boards are also available in various sizes in the form of sheets which can be used as ceilings and walls.

Easy to install: The drywall boards are easy to install and require no plaster to install. The boards neither require any professional skill for application.

Noise reduction: The application of gypsum board helps to reduce noise to a great level. The gypsum board can be installed in two or three levels to reduce unwanted noise.

Easy remodelling: Large building areas can be remodelled easily using the drywall boards as it is relatively easier to install and involves lesser cost.

Quick completion of interiors: With the use of gypsum board, interiors of homes and offices can be completed quickly and easily. The possibility of cracks in the walls is completely negated. There is no requirement of plaster for the installation of these walls. It can be installed by the owners of the home without any professional assistance.

Sound insulation: Another added advantage of the drywall boards includes its ability to prevent the spread of fire. The thickness of the board varies according to specific requirements. For fire and sound proof boards, the board requires around 5/8 inches of thickness.

It is easy to identify the drywall boards which include two thick paper sheets. These paper sheets are similar to the construction paper but are thick and strong. This false ceiling is available with tapes that are adhesive. The seams can be covered using a compound that appears like clay or mud which gives a complete appearance to the walls.

The gypsum board is used worldwide and there are endless number of manufacturers and suppliers of this distinctive and exclusive building material. It can also be bought from many of the online stores at affordable prices.

We cater from small to big type of office renovation in Selangor and design based on customer's requirement. For  enquiries, pls contact us 012-2988560.